Categories

Glass Storage Jar Not easy to break

- Sep 04, 2017 -

FRP tank preservative insulation and the traditional metal cans corrosion insulation in the construction method is very different. Easy construction, improve efficiency, Glass Storage Jar cost savings, easy to master, the application of traditional construction methods compared with a greater advantage. FRP tank anti-corrosion construction process material organization → tank test pressure, Glass Storage Jar leak test → site survey → build scaffolding → insulation construction → protective layer construction → removal of scaffolding.

In the glass fiber reinforced plastic storage tank before the anti-corrosion insulation, the organization of the tank to conduct a preliminary appearance of the acceptance, Glass Storage Jar the inspection equipment appearance without dead ends, no leakage before the tank strength and rigidity test.

Organize the material according to the drawings. Glass Storage Jar All anti-corrosion insulation materials should have a product certification, and indicate the date of production and effective date, issued by the State Quality Supervision Bureau of product quality testing reports, Glass Storage Jar product standards, the use of the manual and the batch of product inspection reports and other documents.

Familiar with the construction site, choose a good material into the road, Glass Storage Jar approach materials to be unified stacking, and pay attention to rain, moisture, insulation materials and galvanized iron can be placed in the glass tank under the tank chamber. Temporary electricity, water in the station near the access.

In the glass steel tank around the scaffolding, as most of the storage tanks are located on the platform, the space is relatively narrow, build scaffolding can take full advantage of platform fence, escalators, maintenance platform for scaffolding knot, fixed. Glass Storage Jar As the tank repair platform has been completed, so the scaffolding pole does not need to be higher than the platform, the first layer of the platform from the top of the tank can be about 1.5m.

As the glass fiber reinforced plastic tank in the process of transport and installation will inevitably appear bump phenomenon, Glass Storage Jar so wrapped in tropical tiles before the requirements of the tank on the outer wall of the tank to fill the local treatment. The wall of the tank is welded in a winding manner, wrapped up from the bottom up, and the heating distance is about 5 cm. The top of the tank is radially laid. Each tank requires about 10m of electric heating. The laying of the electric tape should be carried out under the guidance of the manufacturer. After the completion of electric construction after the remote test to see whether the access path. After the test heat pass to heat the next process.

Our equipment is made of glass fiber reinforced composite plastic, is the use of glass fiber reinforced and unsaturated polyester, Glass Storage Jar epoxy resin and phenolic resin adhesive as the basic composition. Fiberglass features light and hard, non-conductive, high mechanical strength, recycling less, corrosion-resistant steel can produce a variety of machine parts, cars, ships and so on. Glass fiber diameter is very small, generally less than 10μm, fewer defects and smaller, breaking strain is about 30 per thousand, Glass Storage Jar is brittle materials, easy to damage, fracture and corrosion. Substrate relative to the fiber, the strength, modulus is much lower, but can withstand large strain, often with viscoelastic and elastoplastic, Glass Storage Jar is a tough material. So we produce the tank-type rainwater collection and treatment equipment relative to other types of rainwater collection equipment has a stronger resistance to stress, shock resistance, anti-aging ability, management is not easy to break, not easy to deformation.


Related Industry Knowledge

Related Products